| The Same Isolation Technology Trusted by JBL and Marten for their Flagship Speakers, Now Available to Everyone Markham, Ontario (November 6, 2026) — IsoAcoustics, a global leader in acoustic isolation solutions for the professional, home audio, and OEM sectors, today announced that GAIA-TITAN Neo is now available for purchase worldwide. Purpose-built for high-mass floorstanding loudspeakers and subwoofers, GAIA- TITAN Neo comes in three sizes to support speakers and subs weighing up to 620 lbs (280 kg). As the direct successor to the original GAIA-TITAN Series, it keeps the same trusted weight capacities, while introducing redesigned isolation, and integrated height adjustment, simplified tool-free installation, and a flush-fit appearance. Until now, GAIA-TITAN Neo isolation technology was available exclusively through select OEM partners, integrated into the designs of Marten’s flagship Coltrane Supreme Extreme and JBL’s Summit Series loudspeakers. With this launch, the same technology embraced by some of the world’s most respected audio brands becomes available to owners of large loudspeakers and subwoofers everywhere.  Advanced Isolation for Large, High-Mass Loudspeakers Large loudspeakers generate significant mechanical energy. When that energy travels into the floor and reflects back into the cabinet, the cost to the system is clarity, bass definition, and imaging. Historically, spikes were the default answer, but GAIA-TITAN Neo takes a different approach. Rather than mechanically coupling the speaker to the floor, it supports the loudspeaker securely while managing that energy through its internal isolators.Only the lower isolator touches the supporting surface, which limits rigid vibration paths into the floor and reduces reflections back into the cabinet. Testing at the National Research Council of Canada found that IsoAcoustics isolation offers a greater reduction in cabinet vibration compared with spikes, while maintaining a consistent frequency response from 20Hz to 20 kHz. The result is a stable, controlled foundation that enables large loudspeakers to deliver tighter bass, improved imaging, and a more open soundstage, without coloring the sound. Developed From the Inside Out Development of GAIA-TITAN Neo began with the isolator itself. IsoAcoustics refined its internal geometry, materials, profile, thickness, and durometer to optimize isolation performance under the demands of high-mass loudspeakers and subwoofers. The redesigned isolator was then integrated into an entirely new housing that simplifies installation, leveling, and positioning while providing a sleek, flush-fit appearance.  Key Features: GAIA Neo and GAIA-TITAN NeoIntegrated Height Adjustment: Each isolator can be adjusted by up to 0.34 in (8.5 mm) after installation, making it easier to level heavy loudspeakers on uneven floors. Tool-Free, Simplified Installation: GAIA-TITAN Neo replaces a speaker’s original feet or spikes. A top O-ring compresses as the isolator is tightened, creating a secure connection while still allowing the isolator to be rotated into a proper alignment. Flush-Fit Appearance: The housing sits tight against the bottom of the speaker, eliminating the visible lock nut used on the original GAIA-TITAN. Stable Contact on Any Surface: The isolator can pivot to maintain full contact with floors that are not perfectly level, preserving stability and isolation performance. Floor Sliders Included: Sliders make it easier to position heavy speakers after installation. For best performance, floor sliders must be removed once the speakers are in place. Common Thread Sizes Included: Each set includes adapters for the three most common thread sizes, with alternative sizes available by request through IsoAcoustics distributors. Proven in the World’s Most Advance Loudspeakers When IsoAcoustics introduced the GAIA Series in 2016, replacing spikes with isolation marked a major shift in high-end audio. Today, more than 55 leading loudspeaker manufacturers incorporate IsoAcoustics OEM technology into their designs.GAIA-TITAN Neo made its OEM debut in Marten’s flagship Coltrane Supreme Extreme. JBL followed at HIGH END Vienna in 2026, marking its 80th anniversary with JBL | IsoAcoustics isolation feet, a custom, semi-recessed adaptation of the GAIA-TITAN Neo, on its next-generation Summit Everest and Summit K2 loudspeakers. In both cases, the isolators are part of the loudspeaker’s design rather than an aftermarket addition. The consumer release extends this technology to a wider range of heavy loudspeakers and subwoofers.  Three Models, Two Finishes, One Core Technology GAIA-TITAN Neo is available in three models, selected by the total weight of the speaker or subwoofer. Each set of four isolators is rated for the maximum weight listed below. All models are available in dark chrome or black and offer height adjustment. GAIA-TITAN Theis Neo: For large floorstanding speakers and subwoofers weighing up to 320 lbs (145 kg). Size: 3.4 in (86 mm) W x 2.2 in (56 mm) H. Included threads: 1/2″-13, M8-1.25, M14-2.0. GAIA-TITAN Rhea Neo: For very large floorstanding speakers and subwoofers weighing up to 420 lbs (190 kg). Size: 3.7 in (94 mm) W x 2.4 in (60 mm) H. Included threads: 1/2″-13, M8-1.25, M14-2.0. GAIA-TITAN Cronos Neo: For ultra-heavy loudspeakers and reference subwoofers weighing up to 620 lbs (280 kg). Size: 4.2 in (106 mm) W x 2.5 in (64 mm) H. Included threads: 1/2″-13, M10-1.5, M14-2.0.IsoAcoustics’ Online Product Selector helps customers choose the right model and thread size for their loudspeaker through a few simple prompts. Optional accessories, including the GAIA F1 Speaker Jack for lifting heavy speakers during installation and GAIA Carpet Disks for thick-pile carpet, are also available. Pricing & Availability GAIA-TITAN Neo is available to order now through IsoAcoustics’ global network of dealers. Each set of four includes the key accessories needed for installation and positioning. GAIA-TITAN Theis Neo: $1,264.99 (US), $1,499.99 (CA), €1,299.00 (EU), £1099.00 (UK) GAIA-TITAN Rhea Neo: $1,494.99 (US), $1,799.99 (CA), €1,599.00 (EU), £1299.00 (UK) GAIA-TITAN Cronos Neo: $1,954.99 (US), $2,349.99 (CA), €1,999.00 (EU), £1699.00 (UK) For more information or to find a local dealer, visit IsoAcoustics.com. |
IsoAcoustics Launches GAIA-TITAN Neo Worldwide
